It can be soothing to understand that we am not the only one that has skilled scratching and shedding with Birkenstock Madrid Metal Leather shoes. A number of you might have more mature couples that are crumbling or foiling like mine, whereas others have just bought a new match and so are already seeing damaging simply with buckle realignment.

 

I was not putting on my metal Arizonas because, honestly, they searched like crap. You can only produce a first impact when, so there seemed to be no chance which i would wear cracking shoes in public places. I needed taken the time to gently bust-during these shoes and today I was going to take time to fix the uppers. After all, they have conformed to my feet and i also had not been willing to chuck them out.

 

During my actual job, I am a grasp issue solver of extremely sophisticated circumstances. Should I could juggle dealing with a number of troubles right away, I believed i could resolve a darn couple of Birkenstocks. Since I Have was already not sporting the shoes, there can be no hurt tinkering with them. What's the a whole lot worse that can occur?

 

I chose that I was going to dye the leather uppers. When dyeing leather, you must dye a minumum of one tone deeper then your original shade. I had been secure making go from the precious metal uppers rather than the best color…red! I actually have been drooling on the recently introduced Tango Reddish Patent Arizonas. Unfortunately, they are only provided in thin thickness in the united states. I invested a lot of time researching these specific shoes and i also finally located a pair of typical breadth types beyond the US. Even so, if my try things out did the trick, then I will not have to fork on the money for a new kind of shoes.

 

What follows is a set of products necessary to dye leather Birkenstocks:

 

1. Time. This process took me several days.

 

2. Well ventilated work area

 

3. Sandpaper

 

4. Acetone

 

5. Cotton Swaps

 

6. Painter's tape or Masking Tape

 

7. Newspaper

 

8. Q tips

 

9. Rags or a small paint brush

 

10. Jojoba Oil

 

11. Leather Dye

 

12. Resolene

 

13. Be safe! Use gloves, a safety mask and goggles

 

Below are the methods that one have to take to put together the leather, dye the leather, and seal the dye:

 

Sand off of the the metallic finish off with sandpaper. This is simple enough considering that the leather was already shedding.

 

Use Acetone to a cotton swab to remove the rest of the metallic finish.

 

Protect every one of the surfaces that would stop being dyed with painter's tape.

 

Get ready the task region by laying out a well used bath towel and include that with newspaper.

 

Placed on operate clothing that you just do not thoughts receiving messy or tarnished.

 

Slide on silicone hand protection to shield the hands through the dye.

 

Apply a lean covering of Jojoba oils on the prepared leather. This will assist the dye soak in equally.

 

Use the dauber that is included with the dye to utilize a lean cover of dye to the leather.

 

Utilize a Q Suggestion to have the dye on hard to reach areas.

 

Let each layer of dye to free of moisture 10-fifteen minutes before using another coat. Implement as many layers necessary to get the colour that you desire. It had taken me 3 coats to find the deeply reddish shade i wished for.

 

Enable the leather dried up thoroughly about 1-2 hours.

 

Close the dye with a level of Resolene. Initially, I applied a cloth to use the Resolene as guided on the bottle. I came across that it triggered dripping on the white-colored soles. I switched to your clean when utilizing the sealer on the next shoe to stop seeping.

 

Eliminate any dye which includes gotten on to your soles by using a 100 % cotton swab and Acetone. It was an enormous problem for me since the soles were actually white colored. Would stop being a concern with brown or black soles.

 

Allow to dry 24 hours.

 

I am thrilled with how these Birkenstocks ended up. The way I sanded the leather and dabbed on Acetone to take out the metallic finish remaining my dyed shoes with charming undertones. It tells me of how my oiled leather Birkenstocks begin to look over time. The Resolene covered the dye and remaining a wonderful shine for the leather. I have been wearing these dyed Birkenstocks for approximately 1 month and have experienced no problems with shedding, cracking, or cracking.

 

I am not any longer uncomfortable to utilize peeling metal leather Birkenstocks. Now, I proudly use my dyed reddish Birkenstocks. Best part of all, it can be just like having new shoes that are already shattered-in.